| 1. | Technical conditions for lining board of high chromium cast irons
高铬铸铁衬板技术条件 |
| 2. | The making of the slurry valve with high chromium white cast iron
应用新型高铬白口铸铁制造渣浆阀过流件 |
| 3. | The effect of solidification rate on eutectic microstructure of high chromium cast iron
凝固速度对高铬铸铁共晶组织的影响 |
| 4. | Production and control of internal stress in grinding balls of high chromium white cast iron
浅析低铬白口铸铁磨球的铸态组织设计 |
| 5. | Reserarch on high chromium cast iron material quality of the cushion plate of d - 10d double - inlet amp; double - outlet coal mill
双进双出磨煤机衬板高铬铸铁材质的研究 |
| 6. | 880 1080 mpa : 100mm high chromium - nickel corrosion resisting steel forging stock , bars , forgings and parts 880 to 1080 mpa : limiting ruling section 100 mm
高铬镍耐腐蚀钢锻坯,棒材,煅件和部件 |
| 7. | High chromium cast iron has higher erosion resistance at lower impact angle , while the erosion resistance is worse for the lower toughness at normal impact
高铬铸铁在低角冲蚀时有较高的耐冲蚀性，但高角冲蚀时由于脆性大，易崩裂。 |
| 8. | 28cr high chromium cast iron is one of primary wear resistance materials , which is in use at present . it shows superior performance in corrosion wear and abrasive wear
28cr高铬铸铁是目前使用的主要的抗磨材料之一，在抵抗腐蚀磨损和磨料磨损中表现出优越的性能。 |
| 9. | The erosive wear behaviors of five engineering materials , include a3 steel , 1crl8ni9ti stainless steel , high chromium cast iron , ptfe and corundum , were studied by an air blast tester under ambient
采用气流喷砂型实验装置测试了a _ 3钢、 1cr18ni9ti不锈钢、高铬铸铁、聚四氟乙烯和刚玉五种工程材料的耐冲蚀性能。 |
| 10. | Abstract : considering the cutting tool ' s dynamic intensity . this paper made optimization about the cutting value of higher chromium which cast iron , and put forward a theoretic foundation which can be used to cut higher chromium white cast iron with ceramic cutting tools economically
文摘:考虑刀具动态强度条件下，对用陶瓷刀具加工高铬铸铁的切削用量进行了优化计算，从而为用陶瓷刀具经济性地加工高铬铸铁提供了理论依据。 |
